Skip to content
(937) 744-1156Answered 24/7

Slate and Tile Roof Repair in Oakwood, OH (45419)

Oakwood homes in 45419 wear some of the finest roofs in the Miami Valley, and we repair slate, clay tile, cedar and copper with matching materials instead of tearing off what can be saved.

  • ZIP 45419
  • Answered 24/7
  • Montgomery County
45419
Homes and roofs in Oakwood, Ohio
Quick answer

Most Oakwood roof work is repair, not replacement. Swapping a few broken slates or tiles typically runs $465 to $2,180 in the Dayton area, depending on height, pitch and how many pieces we need to match. Rebuilding a worn copper valley or chimney flashing usually costs $1,870 to $5,640. A sound slate roof can outlast several asphalt roofs, so we fix it first.

Drive down Far Hills Avenue or any side street off Oakwood Avenue and you're looking at houses built mostly between about 1910 and the late 1930s. Tudor Revival, Colonial Revival and Georgian homes sit close together under steep roofs, and a lot of them still carry the original slate or clay tile. Others have cedar shakes or a later asphalt roof laid over solid board decking. These are steep, tall roofs with dormers, turrets and tall chimneys, and they reward slow, careful work far more than speed. A careless roofer can break more slate walking to a leak than the leak itself ever did.

Slate from that era often has decades left in the stone itself. What fails first is everything around it: the steel nails that rust through and let slates slide, the copper or terne valleys that wear thin, the built-in box gutters hidden behind the cornice, and the flashing where the roof meets brick and stone. That's where our attention goes. We carry slate hooks, copper nails and a stock of salvaged slate in common sizes and colors, and we match what's on your house rather than patching with whatever is handy.

Gray slate roof with copper valleys on a 1920s Tudor home in Oakwood
Gray slate roof with copper valleys on a 1920s Tudor home in Oakwood

Why Oakwood's early twentieth century homes have such demanding roofs

Oakwood filled in largely during the 1910s, 1920s and 1930s, when wealthier Dayton families moved up the hill from the city. The builders of that period used materials meant to last a lifetime: Vermont and Pennsylvania slate, clay tile, heavy cedar, and copper for flashing and gutters. Hawthorn Hill, the Wright family home on Harman Avenue, is the best-known house from that period, but the same craftsmanship runs through ordinary blocks along Shafor Boulevard and the streets near Hills and Dales MetroPark. Many roofs pitch at 10/12 or steeper, which calls for roof brackets, ladders hooked over the ridge, and a slower pace.

The other thing that defines Oakwood is the canopy. Huge oaks and maples arch over most streets, and those trees drop leaves, acorns and limbs onto roofs and into gutters year-round. Built-in box gutters fill quickly, then hold water against the wood cornice until it rots. A falling limb can crack a dozen slates in one hit. We clean and reline box gutters, repair the cornice wood behind them, and replace broken slate one piece at a time. If you'd like background before we visit, our article on keeping historic slate roofs sound covers the basics.

Weather on these roofs

The freeze-thaw and ice problems that hit Oakwood slate and tile

Slate and clay tile shrug off sun and rain, but Dayton winters test the details. Snow that melts on a warm upper roof refreezes in shaded box gutters and along low eaves, and the ice backs water up under the bottom courses where the overlap is shortest. Repeated freezing can also pop cracked slates loose and split tiles that already had a hairline fracture. Summer thunderstorms bring the other risk: wind gusts that snap limbs from the old trees overhead. After any big storm, we suggest a quick look from the yard with binoculars for missing or slipped pieces, because one gap lets water reach the decking fast.

Ohio weather that wears on roofs

What happens when we come out to an Oakwood home

Oakwood is the shortest trip we make. From our office at 40 N Main St, we follow SR-48 south through the edge of downtown and up the hill on Far Hills Avenue, or take Patterson Boulevard if traffic is heavy. On arrival we inspect from the ground with a long lens first, then set ladders with standoffs so we never lean on gutters or fragile slate. We photograph each problem area and send you a photo report showing broken pieces, worn valleys and flashing gaps. If something is urgent, like an open hole after a limb strike, we make it watertight that day. Our neighbors in nearby Kettering get the same process.

Nearby

Areas near Oakwood we also cover

Questions

Roofing questions from Oakwood

Can you match the original slate on my Oakwood house when pieces break?

Usually, yes. Most Oakwood slate came from Vermont or Pennsylvania quarries, and we keep salvaged slate in common sizes and colors for exactly this reason. We measure the exposure and thickness of your pieces, match color as closely as we can, and install replacements with copper slate hooks or nails so the repair lasts as long as the stone around it.

Should an Oakwood slate roof be replaced with asphalt when it starts leaking?

Rarely. A leak on a slate roof is almost always a flashing, valley or nail problem, not worn-out stone. If the slates still ring when tapped and don't flake, the roof likely has years left. We'll tell you honestly if the slate is soft and delaminating. Even then, many owners choose synthetic slate to keep the look of the house.

What does relining a built-in box gutter in 45419 involve?

We clean the trough out completely, check the wood behind it for rot, and replace any soft fascia or cornice boards. Then we reline the gutter, usually with soldered copper or a fully adhered membrane, and tie it back under the bottom course of roofing. Done well, it stops the hidden water that rots Oakwood cornices and stains plaster ceilings below.

How do you walk on a steep Oakwood slate roof without breaking it?

Mostly we don't walk on the slate itself. We hook ladders over the ridge, use padded roof brackets and planks, and work from those so our weight never lands on the stone. It takes more setup than an asphalt job, which shows up in the labor cost, but it keeps one repair from turning into five.

Do clay tile roofs in Oakwood hold up through Dayton winters?

Good clay tile handles freeze-thaw well, but older tiles with hairline cracks can split once water gets inside and freezes. The bigger winter risk is ice backing up in shaded gutters and valleys. We replace cracked tiles with matching pieces when we can find them, and check the underlayment and flashing at every eave where ice has built up.

Roof trouble in Oakwood?

Call any hour and tell us your street. We will give you a time window before we hang up.

Call (937) 744-1156 now
Call (937) 744-1156 · 24/7